Overview     Features & Specs     Suzuki Advantages     Brochure    

Features and Specifications

Suzuki’s DF25 and DF30 are designed to provide boaters with maximum power, performance and reliability while meeting U.S. EPA 2006 exhaust emission standards. These two models offer technology and features that are hard to find in other outboards in the same class. While their sleek profile and stylish appearance will complement any boat, these 25 and 30 hp outboards also deliver plenty of low-end torque.

DF30 Specifications
Type: 4-Stroke SOHC in-line 3 cylinder, 3 valves per cylinder-2 intake and 1 exhaust. Triple Mikuni carburetors with individual accelerator pumps.
Model Number: DF30MQ DF30EQ DF30T
Displacement: 36.4 cu. in. (597 cc) 36.4 cu. in. (597 cc) 36.4 cu. in. (597 cc)
Bore: 2.559 in. (65 mm.) 2.559 in. (65 mm.) 2.559 in. (65 mm.)
Stroke: 2.362 in. (60 mm.) 2.362 in. (60 mm.) 2.362 in. (60 mm.)
Horsepower: 30.00 30.00 30.00
Operating Range: 5500-6100 5500-6100 5500-6100
Ignition: CDI** Digital CDI** CDI**
Fuel: Unleaded Unleaded Unleaded
Oil Capacity: 3.2 (3.0) 3.2 (3.0) 3.2 (3.0)
Shaft Length: L20 L20 L20
Gear Ratio: 2.09:1/11:23 2.09:1/11:23 2.09:1/11:23
Drive Train Protection: Spline Drive Rubber Hub Spline Drive Rubber Hub Spline Drive Rubber Hub
Prop Pitch Range: 9 - 15 9 - 15 9 - 15
Weight: L 209 L 209 L 209
Trim: Gas assist Gas assist Power trim and tilt
Steering: Tiller Remote/Tiller Remote, tiller opt.

DF30 Features
  Single-Cam, 3-Valve Design
  Oil-Bathed Timing Chain
  Cool Air Intake System
  Solid State Full Transistor Ignition
  PTT (Power Trim and Tilt)
  Gas-Assisted Tilt
  Recoil Starter
  Linear Steering Adjuster
  Clean and Efficient
  Fresh Water Engine Flush Port
  Stainless Steel Water Pump Housing
  Dual Water Intakes
  EZ Oil Drain Plug
  Unique Gear Ratio
  One-Piece Forged Crankshaft
  CARB Rating: 2-star Very Low Emission
  3+3 Protection


DF25 Specifications
Type: 4-Stroke SOHC in-line 3 cylinder, 3 valves per cylinder-2 intake and 1 exhaust. Triple Mikuni carburetors with individual accelerator pumps.
Model Number: DF25MQ DF25EQ DF25T
Displacement: 36.4 cu. in. (597 cc) 36.4 cu. in. (597 cc) 36.4 cu. in. (597 cc)
Bore: 2.559 in. (65 mm.) 2.559 in. (65 mm.) 2.559 in. (65 mm.)
Stroke: 2.362 in. (60 mm.) 2.362 in. (60 mm.) 2.362 in. (60 mm.)
Horsepower: 25.00 25.00 25.00
Operating Range: 4700-5300 4700-5300 4700-5300
Ignition: CDI** Digital CDI** Digital CDI
Fuel: Unleaded Unleaded Unleaded
Oil Capacity: 3.2 (3.0) 3.2 (3.0) 3.2 (3.0)
Shaft Length: S/L 15/20 in. S/L 15/20 in. L20
Gear Ratio: 2.09:1/11:23 2.09:1/11:23 2.09:1/11:23
Drive Train Protection: Spline Drive Rubber Hub Spline Drive Rubber Hub Spline Drive Rubber Hub
Prop Pitch Range: 9 - 15 9 - 15 9 - 15
Weight: S 202, L 209 S 202, L 209 S 205, L 212
Trim: Gas assist / Power trim and tilt Gas assist/ Power trim and tilt Power trim and tilt / Gas assist
Steering: Tiller Tiller Remote / Tiller

DF25 Features
  Single-Cam, 3-Valve Design
  Oil-Bathed Timing Chain
  Cool Air Intake System
  Solid State Full Transistor Ignition
  PTT (Power Trim and Tilt)
  Gas-Assisted Tilt
  Recoil Starter
  Linear Steering Adjuster
  Clean and Efficient
  Fresh Water Engine Flush Port
  Stainless Steel Water Pump Housing
  Dual Water Intakes
  EZ Oil Drain Plug
  Unique Gear Ratio
  One-Piece Forged Crankshaft
  CARB Rating: 2-star Very Low Emission
  3+3 Protection





   HOME
   Our Boatlines
  |  V6 4-Strokes
  |  Big Blocks
  |  4 Strokes
  |  Quick Quote
  |  Financing
  |  Boat Tests
  |  Brochures
  |  Accessories